Hakko FX888D-29BY Digital Soldering Station with Hakko's 6 Most Popular Tips

Description

NessElectronics, Since 1964
Hakko Model Number FX888D-29BY (FX888D-23BY)
, our newest addition to the Hakko soldering station family. Included in this listing: Hakko FX888D power supply, FX-8801 Iron, FH800-03BY iron holder, A1559 sponge, A1561 cleaning wire, T18-D16 1.6mm chisel tip.
In addition you will receive the following tip bundle: T18-B, T18-I, T18-K, T18-D16, T18-D24 & T18-D32.
These are the 6 most popular replacement tips from Hakko.  Enjoy a discount on these tips when purchased as a bundle with the station.This is Hakko's most popular station, from the largest Authorized Hakko Distributor on eBay. Additional tips for this FX888 station are listed on eBay for your convenience as well. (Include additional items shown with this purchase and get additional discounts on those items). Buy today from nesselectronics, distributing Hakko products and accessories for over 20 years, selling on eBay for over 10 years! We are one of the top sellers of Hakko on eBay, please let us add you to our ever growing list of satisfied buyers.
Note: Thi
s is a 110/120 volt stat
ion. You must use a step down tra
nsformer if using with 220/240 volts. Using this station directly on 220/240 volts will damage the station and
voi
d the war
ranty.
SOLDERING STATION
The Hakko FX-888 is an inexpensive yet durable temperature adjustable soldering station that provides more power and takes up less bench space than its predecessor (Hakko 936).
The added power of the FX-888 provides up to a 30% increase in operator productivity due to the increased thermal performance and faster thermal recovery time. Today, workbench space is at a premium, and the FX-888 uses approximately 35% less surface area compared to the Hakko 936.
Other features include:
• adjustable temperature control
• temperature range 392°-896°F (200°- 480°C)
• maintains idle temperature within 1.8°F (1°C)
• ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery
• Celsius and Fahrenheit temperature display
• temperature adjusted by using the up/down digital keypad
• slender iron handles are padded and have an ergonomic design for comfort and ease of use
• wide selection of tips available for soldering SMD and through-hole applications
PLEASE NOTE: THESE STATIONS HAVE BEEN TESTED AND CALIBRATED AT THE FACTORY SO THERE WILL BE SOME INDICATIONS OF HEATING ON THE SOLDERING PENCIL WHICH IS NORMAL.
Specifications
Model Name
FX-888
Part Number
FX888D-29BY
Power Consumption
70W / 120VAC
STATION
Temperature
200°C - 480°C (392°F - 896°F)
Temperature Stability
±1.0°C (1.8°F)
Temperature Control
Closed-loop sensor
Outer Dimensions
100(W) x 120(H) x 130(D) mm
3.9(W) x 4.7(H) x 5.1(D) in.
Weight (w/o cord)
Approx. 1.3 kg (2.9 lbs)
ESD Safe
Yes
APPROVED
SOLDERING IRON
Model Name
FX-8801
Part Number
FX8801-02
Power Consumption
65W / 26VAC
Standard Tip
T18-D16
Tip-to-Ground Resistance
< 2 ohms
Tip-to-Ground Potential
< 2mV
Heating Element
Ceramic
Hand piece Length
190mm (7.5 in.)
Cord Length
1.2m (4 ft.)
Weight  (w/o cord)
44g (0.09 lb)
CONTENTS
Description
Part Number
Station
N/A
Soldering iron
FX-8801
Soldering iron tip
T18-D16
Iron holder
FH800-01BY
Cleaning sponge
A1559
Tip cleaning wire
A1561
Calibration tool
B3466
NOTE:
Station is ESD safe by design and meets or exceeds IPC J-STD-001E
Hakko's most popular tip bundle included in this listing:
T18-I, Sharp Conical
T18-B, Conical
T18-K, Knife Blade Tip
T18-D16, 1.6mm Chisel Tip
T18-D24, 2.4mm Chisel Tip
T18-D32, 3.2mm Chisel Tip
Feedback policy:
We will give you positive feedback as soon as we process your order. You have done your part, now it is up to us to earn your positive feedback and 5 star DSR ratings. If you have questions or problems with your product once it arrives, please call us before leaving negative or neutral feedback to allow us the chance to correct any issues you may have.